# 3d Globe

**URL:** <https://forum.kirupa.com/t/3d-globe/3633>\
**Category:** programming\
**Created:** [January 15, 2002, 6:09pm UTC](https://forum.kirupa.com/t/3d-globe/3633 "2002-01-15T18:09:35Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\
**Post date:** [January 15, 2002, 6:09pm UTC](https://forum.kirupa.com/t/3d-globe/3633/1 "2002-01-15T18:09:35Z")

</div>

Hello Everyone…It’s been SUCH a long time since I last posted!.. I feel like Im doing a confession or something.

Anyway…Hello to ALL!

I wanted to know if there is/are any 3D software out there that i could use to make spinning wire frame globes and at some point add my own skin to the wire frame.

Thanks  
Mike

---

<div class="post-metadata">

**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\
**Post date:** [January 15, 2002, 7:13pm UTC](https://forum.kirupa.com/t/3d-globe/3633/2 "2002-01-15T19:13:34Z")

</div>

3d s max / export to wf with swift  
i ave a spinning globe (earth) in a fla if you want…

---

<div class="post-metadata">

**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\
**Post date:** [January 15, 2002, 10:13pm UTC](https://forum.kirupa.com/t/3d-globe/3633/3 "2002-01-15T22:13:48Z")

</div>

thanks for the reply Eyezberg. I think Imma need a freeware to do this simple project. Unless my employer wants to fork out the cost to purchase it, I’ll do it.

Thanks Again  
Mike