# Bending shapes

**URL:** <https://forum.kirupa.com/t/bending-shapes/3894>\
**Category:** Uncategorized\
**Created:** [April 1, 2002, 7:11am UTC](https://forum.kirupa.com/t/bending-shapes/3894 "2002-04-01T07:11:46Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\
**Post date:** [April 1, 2002, 7:11am UTC](https://forum.kirupa.com/t/bending-shapes/3894/1 "2002-04-01T07:11:46Z")

</div>

is there a way wit the extrusion or lathe option so actually bend a shape such as a cylinder

or is it much easier wit 3d max?

---

<div class="post-metadata">

**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\
**Post date:** [April 6, 2002, 10:02am UTC](https://forum.kirupa.com/t/bending-shapes/3894/2 "2002-04-06T10:02:49Z")

</div>

no I don’t think there is, I could be wrong though so don’t hold me to it 🙂

---

<div class="post-metadata">

**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\
**Post date:** [May 4, 2002, 6:57pm UTC](https://forum.kirupa.com/t/bending-shapes/3894/3 "2002-05-04T18:57:19Z")

</div>

is this what you meant? it might be helpful anyway:)  
[board.flashkit.com/board/…did=274366](http://board.flashkit.com/board/showthread.php?threadid=274366)