# Could someone (3D cube)...?

**URL:** <https://forum.kirupa.com/t/could-someone-3d-cube/61196>\
**Category:** Uncategorized\
**Created:** [August 16, 2004, 9:25pm UTC](https://forum.kirupa.com/t/could-someone-3d-cube/61196 "2004-08-16T21:25:08Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Ryall](https://avatars.discourse-cdn.com/v4/letter/r/53a042/32.png) [@Ryall](https://forum.kirupa.com/u/Ryall)\
**Post date:** [August 16, 2004, 9:25pm UTC](https://forum.kirupa.com/t/could-someone-3d-cube/61196/1 "2004-08-16T21:25:08Z")

</div>

Hey all, I dont have any nice 3d software, so I was wondering if someone could make something REALLY simple for me? All I need is a cube shap, but all the edges and corners need to be rounded off… understand? Im sure this is like one min of work in something like Cin 4D or Max or something.

A wireframe version, and a real basic ‘draft’ render would be great!!

Anyones help would be greatly appreciated!!!

---

<div class="post-metadata">

**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\
**Post date:** [August 16, 2004, 9:39pm UTC](https://forum.kirupa.com/t/could-someone-3d-cube/61196/2 "2004-08-16T21:39:09Z")

</div>

didn’t know exactly what angle or anything, but I whipped these up in 2 minutes, hope you can use them, cuz I’m off ta’ bed now! :thumb:

left: Chamfer Box

right: polymodelled

just crop the one you want

![](http://www.avalon-rev.dk/junk/cube1.jpg)

![](http://www.avalon-rev.dk/junk/cube2.jpg)

---

<div class="post-metadata">

**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\
**Post date:** [August 16, 2004, 9:40pm UTC](https://forum.kirupa.com/t/could-someone-3d-cube/61196/3 "2004-08-16T21:40:42Z")

</div>

great! Thanks for doing that eilsoe!

peace

---

<div class="post-metadata">

**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\
**Post date:** [August 16, 2004, 9:42pm UTC](https://forum.kirupa.com/t/could-someone-3d-cube/61196/4 "2004-08-16T21:42:39Z")

</div>

well as long as you can use 'em 😛

_yawn_

beeeed…