# \[cs5\] Flash Builder / Flash integration

**URL:** https://forum.kirupa.com/t/cs5-flash-builder-flash-integration/311046
**Category:** flash
**Created:** [June 26, 2010, 12:29am UTC](https://forum.kirupa.com/t/cs5-flash-builder-flash-integration/311046 "2010-06-26T00:29:07Z")
**Posts on this page:** 1
**Page:** 1

<div class="post-metadata">

### Author: ![flashdaddy](https://avatars.discourse-cdn.com/v4/letter/f/e36b37/32.png) [@flashdaddy](https://forum.kirupa.com/u/flashdaddy)
#### Post date: [June 26, 2010, 12:29am UTC](https://forum.kirupa.com/t/cs5-flash-builder-flash-integration/311046/1 "2010-06-26T00:29:07Z")

</div>

Hi All,

I’m trying to figure something out. I have a project I built in flash a while back, it’s a small form consisting of about 4 slides each with a number of data fields. Working perfectly in the Flash IDE, but I wanna move it over to Flex so I can do my future programing there. My question is, what’s the correct way of going about this? Should I make a new document class and then cut/paste my code over from the Flash IDE and just use the IDE for design? Should I make a swc? Not sure what the “proper” procedure is for this. Looking forward to your replies and thanks in advance.