# Dynamic Text **URL:** \ **Category:** Uncategorized\ **Created:** [June 9, 2003, 8:00pm UTC](https://forum.kirupa.com/t/dynamic-text/22865 "2003-06-09T20:00:47Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![Sharon\_Chapman](https://avatars.discourse-cdn.com/v4/letter/s/c57346/32.png) [@Sharon\_Chapman](https://forum.kirupa.com/u/Sharon_Chapman)\ **Post date:** [June 9, 2003, 8:00pm UTC](https://forum.kirupa.com/t/dynamic-text/22865/1 "2003-06-09T20:00:47Z")
When I change certain lines of my black text to red using dynamic text, why does it all still stay black. Also when i change the first line to red (and the remainder stays black) why does all the text then change to red? Am i best to use fonts like helvetica when i’m using lots of text. I usually break the text apart but there is too much to do this. Any advice would be appreciated. Thanks Sharon ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\ **Post date:** [June 9, 2003, 8:26pm UTC](https://forum.kirupa.com/t/dynamic-text/22865/2 "2003-06-09T20:26:34Z")
select **render text as html** (the little \<\> button) in the properties panel. 😉 =) ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\ **Post date:** [June 9, 2003, 8:38pm UTC](https://forum.kirupa.com/t/dynamic-text/22865/3 "2003-06-09T20:38:25Z")
Thanx Kax ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\ **Post date:** [June 9, 2003, 8:38pm UTC](https://forum.kirupa.com/t/dynamic-text/22865/4 "2003-06-09T20:38:55Z")
you’re welcome. :beam: