Untitled Document

# Entrance page **URL:** \ **Category:** Uncategorized\ **Created:** [July 10, 2003, 9:51pm UTC](https://forum.kirupa.com/t/entrance-page/25251 "2003-07-10T21:51:07Z")\ **Posts on this page:** 20\ **Page:** 2

**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\ **Post date:** [July 10, 2003, 10:54pm UTC](https://forum.kirupa.com/t/entrance-page/25251/21 "2003-07-10T22:54:52Z")

ok, i’ll follow 3d-iva’s instructions, if i have any doubt, i’ll post it here 😉 ---

**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\ **Post date:** [July 10, 2003, 11:03pm UTC](https://forum.kirupa.com/t/entrance-page/25251/22 "2003-07-10T23:03:40Z")

how can i set the margins to 0px? ---

**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\ **Post date:** [July 10, 2003, 11:07pm UTC](https://forum.kirupa.com/t/entrance-page/25251/23 "2003-07-10T23:07:25Z")

keep in mind if you want it centered vertically also…make the table 3 cols by 3 rows (100% wide 100% height). follow the same instructions but setting the height of the scaling td’s to 50%. ---

**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\ **Post date:** [July 10, 2003, 11:09pm UTC](https://forum.kirupa.com/t/entrance-page/25251/24 "2003-07-10T23:09:21Z")

for 0px margins: ```php ``` ---

**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\ **Post date:** [July 10, 2003, 11:16pm UTC](https://forum.kirupa.com/t/entrance-page/25251/25 "2003-07-10T23:16:43Z")

i cant get it … ☹ i’m using dreamweaver, but i dont get it ---

**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\ **Post date:** [July 10, 2003, 11:19pm UTC](https://forum.kirupa.com/t/entrance-page/25251/26 "2003-07-10T23:19:31Z")

i have this ```php Untitled Document

``` ---

**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\ **Post date:** [July 10, 2003, 11:36pm UTC](https://forum.kirupa.com/t/entrance-page/25251/27 "2003-07-10T23:36:54Z")

wait… i think i’m getting it… ---

**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\ **Post date:** [July 10, 2003, 11:42pm UTC](https://forum.kirupa.com/t/entrance-page/25251/28 "2003-07-10T23:42:24Z")

ok, it’s done :D, but now, how do i center it vertically? ---

**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\ **Post date:** [July 10, 2003, 11:42pm UTC](https://forum.kirupa.com/t/entrance-page/25251/29 "2003-07-10T23:42:36Z")

> marginheight=0 marginwidth=0 This will cause problems in NS and Opera… use right-margin and bottom-margin. Also for compatibility it is better if you declare it in css. but for testing how you have it is fine. But yes that table looks fine. Keep in mind that will only center horizontally ---

**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\ **Post date:** [July 10, 2003, 11:43pm UTC](https://forum.kirupa.com/t/entrance-page/25251/30 "2003-07-10T23:43:19Z")

actually it is margin-right and margin-bottom ---

**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\ **Post date:** [July 10, 2003, 11:46pm UTC](https://forum.kirupa.com/t/entrance-page/25251/31 "2003-07-10T23:46:28Z")

[http://www.eberthdesigns.com/fakeindex.htm](http://www.eberthdesigns.com/fakeindex.htm) ---

**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\ **Post date:** [July 10, 2003, 11:47pm UTC](https://forum.kirupa.com/t/entrance-page/25251/32 "2003-07-10T23:47:01Z")

…but i still see a small space in the right border ---

**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\ **Post date:** [July 10, 2003, 11:48pm UTC](https://forum.kirupa.com/t/entrance-page/25251/33 "2003-07-10T23:48:12Z")

```php


	your content here

``` I knew you were going to ask that ---

**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\ **Post date:** [July 10, 2003, 11:50pm UTC](https://forum.kirupa.com/t/entrance-page/25251/34 "2003-07-10T23:50:17Z")

> \*Originally posted by Eberth \* > \*\*…but i still see a small space in the right border \*\* ohh, now it dissapeared… ---

**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\ **Post date:** [July 10, 2003, 11:52pm UTC](https://forum.kirupa.com/t/entrance-page/25251/35 "2003-07-10T23:52:38Z")

now… how do i center it vertically??? ---

**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\ **Post date:** [July 11, 2003, 12:06am UTC](https://forum.kirupa.com/t/entrance-page/25251/36 "2003-07-11T00:06:55Z")

if you use my tables it should now be centered vertically ---

**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\ **Post date:** [July 11, 2003, 12:08am UTC](https://forum.kirupa.com/t/entrance-page/25251/37 "2003-07-11T00:08:35Z")

i have to change everything again? or what do i have to modify in my code? ---

**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\ **Post date:** [July 11, 2003, 12:09am UTC](https://forum.kirupa.com/t/entrance-page/25251/38 "2003-07-11T00:09:29Z")

```php Untitled Document

``` this is my code… ---

**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\ **Post date:** [July 11, 2003, 12:12am UTC](https://forum.kirupa.com/t/entrance-page/25251/39 "2003-07-11T00:12:32Z")

just put your line ```php

``` In where mine says ```php

your content here ``` That should work…now I wish some one would look at my post and give me some opinions:scream: ---

**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\ **Post date:** [July 11, 2003, 12:24am UTC](https://forum.kirupa.com/t/entrance-page/25251/40 "2003-07-11T00:24:29Z")

actually add the first ```php ``` and the third ```php ``` …in that order you took them from my code. Or you can just add your ```php

``` to my code…then paste all the MM header stuff to mine [Previous page](https://forum.kirupa.com/t/entrance-page/25251.md?page=1) [Next page](https://forum.kirupa.com/t/entrance-page/25251.md?page=3)