# Font display problems

**URL:** <https://forum.kirupa.com/t/font-display-problems/25777>\
**Category:** Uncategorized\
**Created:** [July 16, 2003, 12:51pm UTC](https://forum.kirupa.com/t/font-display-problems/25777 "2003-07-16T12:51:34Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![RoyGerbil](https://avatars.discourse-cdn.com/v4/letter/r/ecb155/32.png) [@RoyGerbil](https://forum.kirupa.com/u/RoyGerbil)\
**Post date:** [July 16, 2003, 12:51pm UTC](https://forum.kirupa.com/t/font-display-problems/25777/1 "2003-07-16T12:51:34Z")

</div>

Hey.

I created a webpage in flash, however, the fonts don’t display properly, the main problem being the ‘e’ is filled in, meaning the hollow in the middle is fully filled…could someone please tel me how to fix this

alan

here is the site [http://www.networknirvana.com.au/ncs/index.html](http://www.networknirvana.com.au/ncs/index.html)

---

<div class="post-metadata">

**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\
**Post date:** [July 16, 2003, 2:08pm UTC](https://forum.kirupa.com/t/font-display-problems/25777/2 "2003-07-16T14:08:12Z")

</div>

went to ur link, it didnt work.

Sometimes it works when you select dynamic text instead of static. Also make sure the font size isnt sumpin (.5) eg 3.5 pt or 9.5 pt it is better with full sized fonts like 4, 6pt etc.

---

<div class="post-metadata">

**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\
**Post date:** [July 16, 2003, 2:13pm UTC](https://forum.kirupa.com/t/font-display-problems/25777/3 "2003-07-16T14:13:01Z")

</div>

RoyGerbil,

Some fonts are accustomed to certain sizes and cannot look their best at a certain size. I have experienced this with Adobe’s Helvicta Neue font, which does the exact same thing if its too small.

It’s either that, or your font was designed to not have holes in the e’s right from the get go.

Try using a different font or resizing the one you have to fix your problem. :cowboy: