# Get to url problem in mac os9

**URL:** <https://forum.kirupa.com/t/get-to-url-problem-in-mac-os9/11058>\
**Category:** Uncategorized\
**Created:** [January 11, 2003, 7:30am UTC](https://forum.kirupa.com/t/get-to-url-problem-in-mac-os9/11058 "2003-01-11T07:30:28Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![max999](https://avatars.discourse-cdn.com/v4/letter/m/ac91a4/32.png) [@max999](https://forum.kirupa.com/u/max999)\
**Post date:** [January 11, 2003, 7:30am UTC](https://forum.kirupa.com/t/get-to-url-problem-in-mac-os9/11058/1 "2003-01-11T07:30:28Z")

</div>

did my site (first) and it works fine on any system in pc and in osx  
but in any other mac system whenever i hit the back buttons in one of my child the main swf starts again from the preloader even if is already loaded. they suggested me to use the anchor to get the different html togheter but do i have to put an anchor on a main frame of my main movie or do i have to anchor all the other movie .the problem is only for the main and each page is loaded into the main usung the self action son if i put an anchor on a specific frame after the preloaDER AND THE INTRON ON THE MAIN TIMELINE OF MY MAIN MOVIE WHENEVER I HIT THE BACK BUTTON OF ONE OF MY CHILD MOVIE i just put the whatever.html/whatever ?  
I am really going insane with this

thanks in advance  
max  
[www.gammacurta.com/flash/index1.html](http://www.gammacurta.com/flash/index1.html)

---

<div class="post-metadata">

**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\
**Post date:** [January 11, 2003, 4:31pm UTC](https://forum.kirupa.com/t/get-to-url-problem-in-mac-os9/11058/2 "2003-01-11T16:31:50Z")

</div>

if your site is completely done in flash just make a back button  
much easier

Grim

---

<div class="post-metadata">

**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\
**Post date:** [January 11, 2003, 7:42pm UTC](https://forum.kirupa.com/t/get-to-url-problem-in-mac-os9/11058/3 "2003-01-11T19:42:07Z")

</div>

what are the problems if i don’t use html and i just use the swf?  
should i load the child onto a level ? It is confusing  
so if i load the child into a level has to be on level zero and i have to create an empty movie clip or can i just do that with the gettourl action betw. two swf?  
i am confused  
thanks  
Massimo

---

<div class="post-metadata">

**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\
**Post date:** [January 12, 2003, 4:45am UTC](https://forum.kirupa.com/t/get-to-url-problem-in-mac-os9/11058/4 "2003-01-12T04:45:12Z")

</div>

no u wnt need to use levels from what i say what you could do is put a geturl action on each button which will open the section of your website liek say the tanget section it will open in \_parent so it replaces the current page

Grim

---

<div class="post-metadata">

**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\
**Post date:** [January 12, 2003, 8:28pm UTC](https://forum.kirupa.com/t/get-to-url-problem-in-mac-os9/11058/5 "2003-01-12T20:28:28Z")

</div>

ok so what about the back buttons they should be  
gettourl index1.html parent too?  
Thanks a lot  
massimo