# Inertia fade help please **URL:** \ **Category:** Uncategorized\ **Created:** [June 9, 2003, 9:23am UTC](https://forum.kirupa.com/t/inertia-fade-help-please/22819 "2003-06-09T09:23:10Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![Ifonly](https://avatars.discourse-cdn.com/v4/letter/i/ecd19e/32.png) [@Ifonly](https://forum.kirupa.com/u/Ifonly)\ **Post date:** [June 9, 2003, 9:23am UTC](https://forum.kirupa.com/t/inertia-fade-help-please/22819/1 "2003-06-09T09:23:10Z")
hi, i just did the tutorial on inertia fade. my problem is this: i want my 4 pictures to be solid at the 4 corners of my stage and then fade into each other as you move around on the stage… i used the action script right off the site. my picture is 287x70 (i use it as my footer, if you want to see it) and i was wondering what positions to use. does it rely only on the stage or does it rely on the orientation on the page? help would be greatly appreciated [here’s the fla](http://www.r-and-bfabricating.com/start.fla) thanks in advance ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\ **Post date:** [June 9, 2003, 9:25am UTC](https://forum.kirupa.com/t/inertia-fade-help-please/22819/2 "2003-06-09T09:25:01Z")
just testing my footer again ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\ **Post date:** [June 12, 2003, 8:48pm UTC](https://forum.kirupa.com/t/inertia-fade-help-please/22819/3 "2003-06-12T20:48:18Z")
If you could provide your .fla I will take a look at it and see what I can do. ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\ **Post date:** [June 12, 2003, 11:40pm UTC](https://forum.kirupa.com/t/inertia-fade-help-please/22819/4 "2003-06-12T23:40:56Z")
there’s a link right abover my footer but here it is again: [Footer Fla](http://www.r-and-bfabricating.com/start.fla) and thanks beta, people like you make the learning experience all that much better :thumb: ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\ **Post date:** [June 13, 2003, 4:01am UTC](https://forum.kirupa.com/t/inertia-fade-help-please/22819/5 "2003-06-13T04:01:35Z")
Ok, since this tutorial was written for an area that has the same width and height, the code used isn’t going to work, I couldn’t get it much better than you have it now without it getting jumpy on me. It would involve rewriting the code, which I will try, but I can’t guarantee anything. ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\ **Post date:** [June 13, 2003, 4:54am UTC](https://forum.kirupa.com/t/inertia-fade-help-please/22819/6 "2003-06-13T04:54:42Z")
i kinda figured it had somthing to do with the fact that the original tut was based on a square… thanks for the help ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\ **Post date:** [July 30, 2003, 9:25pm UTC](https://forum.kirupa.com/t/inertia-fade-help-please/22819/7 "2003-07-30T21:25:42Z")
Glad you liked the tutorial I made!!! :beam: