# Kirupa Preloader \*Almost\* Works

**URL:** <https://forum.kirupa.com/t/kirupa-preloader-almost-works/11916>\
**Category:** flash\
**Created:** [January 23, 2003, 9:57pm UTC](https://forum.kirupa.com/t/kirupa-preloader-almost-works/11916 "2003-01-23T21:57:20Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![harvcraven](https://avatars.discourse-cdn.com/v4/letter/h/898d66/32.png) [@harvcraven](https://forum.kirupa.com/u/harvcraven)\
**Post date:** [January 23, 2003, 9:57pm UTC](https://forum.kirupa.com/t/kirupa-preloader-almost-works/11916/1 "2003-01-23T21:57:20Z")

</div>

Hiya - found loads of great tutorials already on this site - thanks for the easy-to-follow instructions!

However (You knew that it was gonna happen), I can’t seem to get the preloader with percentage bar functioning properly remotely. The movie preloads alright, but users cannot see the preloader animation I created, rather just a blank white screen until the movie pops up. Very frustrating, and I have no idea what went wrong.

You can see the problem for yourselves at [\>\>this site\<\<](http://www.autoprise.com/overview.html) . Just click the hypertext to view my movie.

Any ideas/suggestions? I even put a one second delay in the first frame of the preloader just in case it was loading too fast… I guess it’s like a preloaded preloader now :beam: !

Thanks so much

Harv

---

<div class="post-metadata">

**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\
**Post date:** [January 23, 2003, 10:11pm UTC](https://forum.kirupa.com/t/kirupa-preloader-almost-works/11916/2 "2003-01-23T22:11:57Z")

</div>

you mean to click the link in your post and then click the link:

**[SIZE=1]Click here to see a Flash overview of Autoprise’s key solutions.[/SIZE]**

:q:

---

<div class="post-metadata">

**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\
**Post date:** [January 23, 2003, 10:16pm UTC](https://forum.kirupa.com/t/kirupa-preloader-almost-works/11916/3 "2003-01-23T22:16:07Z")

</div>

Yes, that is correct. 😊

---

<div class="post-metadata">

**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\
**Post date:** [January 24, 2003, 12:35am UTC](https://forum.kirupa.com/t/kirupa-preloader-almost-works/11916/4 "2003-01-24T00:35:21Z")

</div>

i have a broad band conection 512 and is taking FOREVER to load ☹

---

<div class="post-metadata">

**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\
**Post date:** [January 24, 2003, 12:55am UTC](https://forum.kirupa.com/t/kirupa-preloader-almost-works/11916/5 "2003-01-24T00:55:36Z")

</div>

Strange - the file is only 170KB… try again. We too have broadband and it takes a mere 3 seconds…

---

<div class="post-metadata">

**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\
**Post date:** [January 24, 2003, 1:01am UTC](https://forum.kirupa.com/t/kirupa-preloader-almost-works/11916/6 "2003-01-24T01:01:34Z")

</div>

now it worked =)

about your problem:

this can be anything, i cannot help you without looking the fla :-\

is that possible?