# Load Movies

**URL:** <https://forum.kirupa.com/t/load-movies/17099>\
**Category:** flash\
**Created:** [April 1, 2003, 12:33pm UTC](https://forum.kirupa.com/t/load-movies/17099 "2003-04-01T12:33:00Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Davehead](https://avatars.discourse-cdn.com/v4/letter/d/58f4c7/32.png) [@Davehead](https://forum.kirupa.com/u/Davehead)\
**Post date:** [April 1, 2003, 12:33pm UTC](https://forum.kirupa.com/t/load-movies/17099/1 "2003-04-01T12:33:00Z")

</div>

Hi all  
I am creating a site, but when the user goes to a certain page of the site, just the content of that page loads, not the whole interface etc.  
I use the “loadMovie” action with “level 0”, but can only get the whole page (movie) to load, not just the content of the page.  
I think that what I need to do is replace a movie clip, but am not sure how.  
Please help!!:-\

---

<div class="post-metadata">

**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\
**Post date:** [April 1, 2003, 1:06pm UTC](https://forum.kirupa.com/t/load-movies/17099/2 "2003-04-01T13:06:56Z")

</div>

Take a look at this tutorial, hopefully it will help. =)

[http://www.kirupa.com/developer/mx/full\_site.htm](http://www.kirupa.com/developer/mx/full_site.htm)

---

<div class="post-metadata">

**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\
**Post date:** [April 1, 2003, 1:27pm UTC](https://forum.kirupa.com/t/load-movies/17099/3 "2003-04-01T13:27:10Z")

</div>

Thanks mate,  
Exactly what I needed,  
🙂