# Loading frames

**URL:** <https://forum.kirupa.com/t/loading-frames/261432>\
**Category:** flash\
**Created:** [May 27, 2008, 4:15pm UTC](https://forum.kirupa.com/t/loading-frames/261432 "2008-05-27T16:15:38Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![kv79](https://avatars.discourse-cdn.com/v4/letter/k/47e85d/32.png) [@kv79](https://forum.kirupa.com/u/kv79)\
**Post date:** [May 27, 2008, 4:15pm UTC](https://forum.kirupa.com/t/loading-frames/261432/1 "2008-05-27T16:15:38Z")

</div>

Hi all,

I have a embed swf with HTML .  
I want that first flash display his preface loading .

Is that possible ?

Thanks advance .

---

<div class="post-metadata">

**Author:** ![GrndMasterFlash](https://avatars.discourse-cdn.com/v4/letter/g/71c47a/32.png) [@GrndMasterFlash](https://forum.kirupa.com/u/GrndMasterFlash)\
**Post date:** [May 27, 2008, 5:54pm UTC](https://forum.kirupa.com/t/loading-frames/261432/2 "2008-05-27T17:54:24Z")

</div>

when flash is loaded it takes some vars from the embedded code in the HTML  
so just add an extra param with a value to equal where you want to start like

\<param = startHere, value = 12\>

then on the first frame of you movie (or in you class) have a gotoAndPlay(startHere)

i think that will work, haven’t tried it but it should:rambo:

---

<div class="post-metadata">

**Author:** ![kv79](https://avatars.discourse-cdn.com/v4/letter/k/47e85d/32.png) [@kv79](https://forum.kirupa.com/u/kv79)\
**Post date:** [May 28, 2008, 7:08am UTC](https://forum.kirupa.com/t/loading-frames/261432/3 "2008-05-28T07:08:16Z")

</div>

[www.servisracunara.co.nr](http://www.servisracunara.co.nr)

Then I will need to change a html into swf .  
because the Stage is 800x200 of flash ,can you imagine what I could gain with loading ? -\>I will gain only a 1/3 of the page with loading .