# Modelling a teapot lid

**URL:** <https://forum.kirupa.com/t/modelling-a-teapot-lid/105537>\
**Category:** Uncategorized\
**Created:** [March 27, 2004, 3:38am UTC](https://forum.kirupa.com/t/modelling-a-teapot-lid/105537 "2004-03-27T03:38:22Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![iLikePie](https://avatars.discourse-cdn.com/v4/letter/i/85f322/32.png) [@iLikePie](https://forum.kirupa.com/u/iLikePie)\
**Post date:** [March 27, 2004, 3:38am UTC](https://forum.kirupa.com/t/modelling-a-teapot-lid/105537/1 "2004-03-27T03:38:22Z")

</div>

hi guys,

i’m trying to model a teapot, and i can’t work out a good way to make the lid. I’ve attached a photo of the lid i’m using…

what i’ve tried so far is to make a mushroom-ish shape, and then use sub-d’s to push the semi-circles down creating the handle bit, but it didn’t work very well (the edges weren’t smooth like the real one, and they weren’t symmetrical.)

so, any ideas?

thanks  
Stu

---

<div class="post-metadata">

**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\
**Post date:** [April 7, 2004, 8:43am UTC](https://forum.kirupa.com/t/modelling-a-teapot-lid/105537/2 "2004-04-07T08:43:59Z")

</div>

i’m gonna remodel it and see if it works… i may have just accidentally made a mistake at some point, or done something i shouldn’t have while experimenting, and forgotten to undo it.

anyway, thanks for the help, i’ll let y’all know how the new one turns out 🙂  
Stu