# My 3D site -- DANS3DSHOWCASE -- I need feedback! **URL:** \ **Category:** design\ **Created:** [February 22, 2002, 10:13pm UTC](https://forum.kirupa.com/t/my-3d-site-dans3dshowcase-i-need-feedback/4137 "2002-02-22T22:13:51Z")\ **Posts on this page:** 9\ **Page:** 1
**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\ **Post date:** [February 22, 2002, 10:13pm UTC](https://forum.kirupa.com/t/my-3d-site-dans3dshowcase-i-need-feedback/4137/1 "2002-02-22T22:13:51Z")
Hey, I need some feedback on the site that I have just started. If you can give me some ideas that would be great! [dans3dshowcase.tripod.com](http://dans3dshowcase.tripod.com) Enjoy! ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\ **Post date:** [February 23, 2002, 1:15am UTC](https://forum.kirupa.com/t/my-3d-site-dans3dshowcase-i-need-feedback/4137/2 "2002-02-23T01:15:24Z")
is there supposed to be nothing on the Darkside…? and the lightside didn’t open anything…the entrance is kool. might want to make something that moves on the opening though…can’t really give opinions…life’s to short to judge things. ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\ **Post date:** [February 23, 2002, 3:06am UTC](https://forum.kirupa.com/t/my-3d-site-dans3dshowcase-i-need-feedback/4137/3 "2002-02-23T03:06:35Z")
What are you talking about, “the dark side doesn’t do anything”?? You have to click the launch site button and wait for a little bit. I guess my preloader got messed up, thanks for notifying me! 🙂 ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\ **Post date:** [February 23, 2002, 4:13am UTC](https://forum.kirupa.com/t/my-3d-site-dans3dshowcase-i-need-feedback/4137/4 "2002-02-23T04:13:12Z")
i waited for like 5 minutes. i went to the bathroom while i waited and nothing was up…i’ll try again later. 4:19 am EST :: still nothing on the darkside. sorry bro ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\ **Post date:** [February 23, 2002, 2:56pm UTC](https://forum.kirupa.com/t/my-3d-site-dans3dshowcase-i-need-feedback/4137/5 "2002-02-23T14:56:51Z")
ok the preloader works. But…always a but. you should put a bar or something there to tell people how much is left to load. I didn’t wait, i get really impatient. Just put a read-out that says wut the percent is that is left, or how much is loaded…something like that…then i’ll let ya know wut i think of the content. ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\ **Post date:** [February 23, 2002, 4:35pm UTC](https://forum.kirupa.com/t/my-3d-site-dans3dshowcase-i-need-feedback/4137/6 "2002-02-23T16:35:03Z")
Sorry, I am stupid and I can’t figure out how to make a bar preloader! 😛 ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\ **Post date:** [February 24, 2002, 5:04pm UTC](https://forum.kirupa.com/t/my-3d-site-dans3dshowcase-i-need-feedback/4137/7 "2002-02-24T17:04:21Z")
Nice stuff quicksilver. Great design, but I guess the 2.4 mb are a little bit too much for those who don’t have cable or DSL. why don’t you try to break it in small pieces ??? I’m waiting for the tutorial section impatiently. pom 0] ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\ **Post date:** [February 25, 2002, 10:40pm UTC](https://forum.kirupa.com/t/my-3d-site-dans3dshowcase-i-need-feedback/4137/8 "2002-02-25T22:40:03Z")
If you do a little research, you can easily find a bar preloader tutorial. Check [Flashkit.com](http://Flashkit.com). There’s one there somewhere. You REALLY should have a bar or percent loader if you have a whopping 2.4 MB swf file! ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\ **Post date:** [February 26, 2002, 1:41am UTC](https://forum.kirupa.com/t/my-3d-site-dans3dshowcase-i-need-feedback/4137/9 "2002-02-26T01:41:12Z")
looks good, but you’re going to have to cut it down for people to view it. Ultrashock had an award winning 3d intro and it was like a minute long …won awards…but it was not as large as your file.