# My image is transparent

**URL:** https://forum.kirupa.com/t/my-image-is-transparent/172136
**Category:** Uncategorized
**Created:** [December 11, 2005, 9:22pm UTC](https://forum.kirupa.com/t/my-image-is-transparent/172136 "2005-12-11T21:22:28Z")
**Posts on this page:** 1
**Page:** 1

<div class="post-metadata">

### Author: ![FunyLikaFuneral](https://yyz1.discourse-cdn.com/flex011/user_avatar/forum.kirupa.com/funylikafuneral/32/2002_2.png) [@FunyLikaFuneral](https://forum.kirupa.com/u/FunyLikaFuneral)
#### Post date: [December 11, 2005, 9:22pm UTC](https://forum.kirupa.com/t/my-image-is-transparent/172136/1 "2005-12-11T21:22:28Z")

</div>

Im very new to flash and have been self taught so I do not know the fine details, but here is the issue I am having.

I have a button which when rolled over causes an image to fade up.

When the button is rolled off a movie plays called a “parked clip”

Im using this tutorial [HERE](http://www.macromedia.com/cfusion/knowledgebase/index.cfm?id=tn_15069)

Well the problem im having is when the button is rolled over the image is fading up and stoping at about 60% fade up. Its playing all the way till the end but the image never becomes fully visable. So once it hits the stop command it should be 100% but is around 60%.

A few details… I have a mask covering a few of the different areas, but have deleted them and tested but had the same issue. I am not very good at actionscripting but I am using the stuff from the tutorial above.

If anyone can help it would be so very appricated. Thank you.

Tyler