# New to flash MX have a question?

**URL:** <https://forum.kirupa.com/t/new-to-flash-mx-have-a-question/14874>\
**Category:** flash\
**Created:** [March 3, 2003, 9:32pm UTC](https://forum.kirupa.com/t/new-to-flash-mx-have-a-question/14874 "2003-03-03T21:32:01Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![FatBeat](https://avatars.discourse-cdn.com/v4/letter/f/58956e/32.png) [@FatBeat](https://forum.kirupa.com/u/FatBeat)\
**Post date:** [March 3, 2003, 9:32pm UTC](https://forum.kirupa.com/t/new-to-flash-mx-have-a-question/14874/1 "2003-03-03T21:32:01Z")

</div>

ok well, I have seen alot of web sites that have the same layout, i dont mean design. Here is what i mean and here is my question. They have the same templet through out their site. This is really hard to explain, when you click on a button for example to go the shows everything stays the same and only the middle will load and have the new context. The only way i think that you would get what i am saying is by looking at this web site.

please look this will help me out a lot

[www.thrice.net](http://www.thrice.net) (click on media or show and you will know what i mean, notice that ony the middle part loads)

I have tryed to do it but everytime all of the page context has to load insted like their’s only the middle part loads

can you tell me where i could learn how to do that or can you help please. It wolud make my design life easier 🙂

---

<div class="post-metadata">

**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\
**Post date:** [March 3, 2003, 10:05pm UTC](https://forum.kirupa.com/t/new-to-flash-mx-have-a-question/14874/2 "2003-03-03T22:05:13Z")

</div>

the page you referenced is done with HTML frames: each frame has a name, and then the href link targets the named html frame to change its content (here’s a link to a site i did that combines flash w. html frames: [http://www.lorbermedia.com](http://www.lorbermedia.com) )  
you can also do this in flash, probably much easier…(-:  
-mojo

---

<div class="post-metadata">

**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\
**Post date:** [March 3, 2003, 10:06pm UTC](https://forum.kirupa.com/t/new-to-flash-mx-have-a-question/14874/3 "2003-03-03T22:06:07Z")

</div>

ps. send me a PM if you want some help…:goatee: