# Omfg!

**URL:** <https://forum.kirupa.com/t/omfg/13238>\
**Category:** Uncategorized\
**Created:** [February 10, 2003, 5:55pm UTC](https://forum.kirupa.com/t/omfg/13238 "2003-02-10T17:55:29Z")\
**Posts on this page:** 11\
**Page:** 1

<div class="post-metadata">

**Author:** ![eilsoe](https://avatars.discourse-cdn.com/v4/letter/e/9fc348/32.png) [@eilsoe](https://forum.kirupa.com/u/eilsoe)\
**Post date:** [February 10, 2003, 5:55pm UTC](https://forum.kirupa.com/t/omfg/13238/1 "2003-02-10T17:55:29Z")

</div>

check the tutorial on [www.mjau-mjau.com](http://www.mjau-mjau.com) !!!

someone posted this site in the mx section, and I just happended to stumble across the one tut this site has, and it’s friggin awesome!!

I know there are many tut’s on the same subject out there, but this one is SO easy to understand…!!

the author really put some work into this…!

---

<div class="post-metadata">

**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\
**Post date:** [February 10, 2003, 6:00pm UTC](https://forum.kirupa.com/t/omfg/13238/2 "2003-02-10T18:00:17Z")

</div>

Wow…that is a really awesome tut. crazy. I cant wait to go home and try it out! (if olny i had a laptop to I can use flash all day at work:chinaman:

---

<div class="post-metadata">

**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\
**Post date:** [February 10, 2003, 6:02pm UTC](https://forum.kirupa.com/t/omfg/13238/3 "2003-02-10T18:02:11Z")

</div>

Yea I can tell that by only looking at it! Quite a tut!  
btw I’m reading a utute on making a low-poly head in 3ds max and it’s so awful tute! It just shows me a pic and says “Make the head look like this!” lol!  
That tute rocks! (on the mjau site of course)

---

<div class="post-metadata">

**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\
**Post date:** [February 10, 2003, 6:13pm UTC](https://forum.kirupa.com/t/omfg/13238/4 "2003-02-10T18:13:14Z")

</div>

good max tuts are hard to come by, the best of the best, of what I’ve found…

is on [www.3dbuzz.com](http://www.3dbuzz.com) .

just register and download the vtm’s!

HELLA EASY!!

---

<div class="post-metadata">

**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\
**Post date:** [February 10, 2003, 6:56pm UTC](https://forum.kirupa.com/t/omfg/13238/5 "2003-02-10T18:56:35Z")

</div>

thx =)

---

<div class="post-metadata">

**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\
**Post date:** [February 10, 2003, 10:11pm UTC](https://forum.kirupa.com/t/omfg/13238/6 "2003-02-10T22:11:12Z")

</div>

i registered but cant find the VTMs

---

<div class="post-metadata">

**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\
**Post date:** [February 10, 2003, 10:26pm UTC](https://forum.kirupa.com/t/omfg/13238/7 "2003-02-10T22:26:14Z")

</div>

“downloads” under your personal menu…

---

<div class="post-metadata">

**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\
**Post date:** [February 10, 2003, 10:31pm UTC](https://forum.kirupa.com/t/omfg/13238/8 "2003-02-10T22:31:58Z")

</div>

SWEET! i am going there right now cause max is all fired up, thanks biggie

---

<div class="post-metadata">

**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\
**Post date:** [February 10, 2003, 10:36pm UTC](https://forum.kirupa.com/t/omfg/13238/9 "2003-02-10T22:36:34Z")

</div>

Wow - that tutorial is really impressive! One of the best I have ever seen.

Cheers!  
Kirupa :rambo:

---

<div class="post-metadata">

**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\
**Post date:** [February 11, 2003, 1:19am UTC](https://forum.kirupa.com/t/omfg/13238/10 "2003-02-11T01:19:36Z")

</div>

mdipi, I ask you again… WHY “BIGGIE”…???

:cool:

---

<div class="post-metadata">

**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\
**Post date:** [February 11, 2003, 1:43am UTC](https://forum.kirupa.com/t/omfg/13238/11 "2003-02-11T01:43:00Z")

</div>

hey - have you looked at his projects page on Mjau-Mjau?

Look at his newest one - the picture viewer - amazing!!!