# Point me in the right direction.... Flash reading physical devices

**URL:** <https://forum.kirupa.com/t/point-me-in-the-right-direction-flash-reading-physical-devices/300923>\
**Category:** flash\
**Created:** [November 30, 2009, 5:39pm UTC](https://forum.kirupa.com/t/point-me-in-the-right-direction-flash-reading-physical-devices/300923 "2009-11-30T17:39:58Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![sqladmin](https://yyz1.discourse-cdn.com/flex011/user_avatar/forum.kirupa.com/sqladmin/32/125_2.png) [@sqladmin](https://forum.kirupa.com/u/sqladmin)\
**Post date:** [November 30, 2009, 5:39pm UTC](https://forum.kirupa.com/t/point-me-in-the-right-direction-flash-reading-physical-devices/300923/1 "2009-11-30T17:39:58Z")

</div>

I’m sure this has been done before…

I would like to know if it’s possible to tie Flash into physical devices, so  
the display is of course flash, but underlying input is from a physical device.

Such as metal detector, water gauge, battery voltage, etc.

Any instruction, or links to places which may describe this; please let me know.

Many thanks 🙂