# Requesting Some Help

**URL:** <https://forum.kirupa.com/t/requesting-some-help/29440>\
**Category:** design\
**Created:** [August 26, 2003, 8:01pm UTC](https://forum.kirupa.com/t/requesting-some-help/29440 "2003-08-26T20:01:07Z")\
**Posts on this page:** 2\
**Page:** 2

<div class="post-metadata">

**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\
**Post date:** [August 27, 2003, 3:49pm UTC](https://forum.kirupa.com/t/requesting-some-help/29440/21 "2003-08-27T15:49:09Z")

</div>

Thanks mdipi…It’s engouraging coming from someone with 6000+ posts to a newbie…🙂

The technique I used…

Make a selection on a “good area”…Copy and paste to a new layer…Move it into place (sometimes using erase if it overlaps areas “outside” where I need it)…Merge down…and repeat…and repeat…and repeat

Once an area has been covered I used Clone Stamp and Smudge to “hide” the rough areas, then I made a selection of the entire “repaired” area and used Noise\>Add Noise set to 3…Sometimes twice if it needed it…=) …

And r00Fies, no problem…glad you liked it…!!!.. :thumb:

---

<div class="post-metadata">

**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\
**Post date:** [August 28, 2003, 8:46am UTC](https://forum.kirupa.com/t/requesting-some-help/29440/22 "2003-08-28T08:46:32Z")

</div>

and i made all of that only using the healing brush tool.

[Previous page](https://forum.kirupa.com/t/requesting-some-help/29440.md?page=1)