# Setting parameters or properties

**URL:** <https://forum.kirupa.com/t/setting-parameters-or-properties/3091>\
**Category:** Uncategorized\
**Created:** [September 24, 2001, 4:09am UTC](https://forum.kirupa.com/t/setting-parameters-or-properties/3091 "2001-09-24T04:09:17Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\
**Post date:** [September 24, 2001, 4:09am UTC](https://forum.kirupa.com/t/setting-parameters-or-properties/3091/1 "2001-09-24T04:09:17Z")

</div>

Ive seen on other peoples webpages using Flash that when you click on the right hand mouse buton none of the options apart from “about flash 4” appear, so basically what id like to know is how is this option accomplished?

---

<div class="post-metadata">

**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\
**Post date:** [September 24, 2001, 11:43am UTC](https://forum.kirupa.com/t/setting-parameters-or-properties/3091/2 "2001-09-24T11:43:54Z")

</div>

In your publish settings, you’ll find a panel with check boxes. Make sure that html is checked. Then look at the top of the panel, there are tabs, one says “html”  
Select that tab. There are a bunch of very useful tools in there to help you get the code up on a page.

If you’re using something like dreamweaver to embed your objects, you’ll have to look at the source in dreamweaver and in the published html doc from flash, and compare the differences.

---

<div class="post-metadata">

**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\
**Post date:** [September 24, 2001, 9:22pm UTC](https://forum.kirupa.com/t/setting-parameters-or-properties/3091/3 "2001-09-24T21:22:36Z")

</div>

OK thanx for that, but also where do you get the option to make the movie protected?

---

<div class="post-metadata">

**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\
**Post date:** [September 24, 2001, 9:32pm UTC](https://forum.kirupa.com/t/setting-parameters-or-properties/3091/4 "2001-09-24T21:32:00Z")

</div>

That’s in the same place but in the tab marked “flash”