# Solid Cube

**URL:** <https://forum.kirupa.com/t/solid-cube/172391>\
**Category:** design\
**Created:** [December 13, 2005, 10:40pm UTC](https://forum.kirupa.com/t/solid-cube/172391 "2005-12-13T22:40:13Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Tyg3r](https://yyz1.discourse-cdn.com/flex011/user_avatar/forum.kirupa.com/tyg3r/32/1341_2.png) [@Tyg3r](https://forum.kirupa.com/u/Tyg3r)\
**Post date:** [December 13, 2005, 10:40pm UTC](https://forum.kirupa.com/t/solid-cube/172391/1 "2005-12-13T22:40:13Z")

</div>

Im fairly new to this application, so bare with me.

Using the Advance Modeler, i wanted to make a SOLID cube. The model is basically 1pixal thick. If it were thicker, i would be able to cut bits out make a tunnel (for example).

Any suggestions?

Mark

* * *

[Bdsm Mistress](http://www. **** tube.com/categories/245/mistress/videos/1)