# Sticking buttons in navigation

**URL:** <https://forum.kirupa.com/t/sticking-buttons-in-navigation/37542>\
**Category:** flash\
**Created:** [December 11, 2003, 1:20pm UTC](https://forum.kirupa.com/t/sticking-buttons-in-navigation/37542 "2003-12-11T13:20:51Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Janet\_Denton](https://avatars.discourse-cdn.com/v4/letter/j/ccd318/32.png) [@Janet\_Denton](https://forum.kirupa.com/u/Janet_Denton)\
**Post date:** [December 11, 2003, 1:20pm UTC](https://forum.kirupa.com/t/sticking-buttons-in-navigation/37542/1 "2003-12-11T13:20:51Z")

</div>

HI, Hope someone can direct me on the right path here.  
I have a button question that I am dealing with. Sometimes on rollover my buttons are not working properly. I assume it has something to do with the HIT space & how I made the buttons to begin with. I’m just not sure exactly what I need to do to correct the problem. I had worked on this several months ago & thought I had corrected the issue…But obviously I didn’t.  
I know you only need one hit space per button…but  
I don’t know about blank key frames in the hit space spot…If they are supposed to be there or not?  
Since this is sticking rather sporactically depending on where I roll over the button at…I’m at a loss as to what I am doing wrong.

Please could someone point m in the right direction with this?  
I’ve looked at it a couple hours & tried several things, none of which seem to be working.

Thanks a lot for all your help.  
Janet