# Stopping the wheel in mx

**URL:** <https://forum.kirupa.com/t/stopping-the-wheel-in-mx/34718>\
**Category:** Uncategorized\
**Created:** [November 5, 2003, 5:30pm UTC](https://forum.kirupa.com/t/stopping-the-wheel-in-mx/34718 "2003-11-05T17:30:39Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![brockus](https://avatars.discourse-cdn.com/v4/letter/b/6bbea6/32.png) [@brockus](https://forum.kirupa.com/u/brockus)\
**Post date:** [November 5, 2003, 5:30pm UTC](https://forum.kirupa.com/t/stopping-the-wheel-in-mx/34718/1 "2003-11-05T17:30:39Z")

</div>

I have a bunch of circle rotating at a speed dictated by the position of the mouse. I can’t figure out how to control it on both the x and y axis. Hard to explain so I have attached an fla. Basically, the wheel will stop relying on the x access but I want it to stop whenever you rollover any of the outside circles.

Thanks in advance,  
Brock

---

<div class="post-metadata">

**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\
**Post date:** [November 5, 2003, 5:34pm UTC](https://forum.kirupa.com/t/stopping-the-wheel-in-mx/34718/2 "2003-11-05T17:34:19Z")

</div>

the fla for my previous message.