# Target loading! **URL:** \ **Category:** flash\ **Created:** [September 13, 2002, 10:30am UTC](https://forum.kirupa.com/t/target-loading/5501 "2002-09-13T10:30:56Z")\ **Posts on this page:** 12\ **Page:** 1
**Author:** ![jerry](https://avatars.discourse-cdn.com/v4/letter/j/5daacb/32.png) [@jerry](https://forum.kirupa.com/u/jerry)\ **Post date:** [September 13, 2002, 10:30am UTC](https://forum.kirupa.com/t/target-loading/5501/1 "2002-09-13T10:30:56Z")
Allright!.. Hey, I’m trying to load a movie into my main.swf, the below code works, BUT: [COLOR=royalblue]\_root.createEmptyMovieClip(“container”,2); container.loadMovie(“eq.swf”); container.\_x = 187; container.\_y = 311;[/COLOR] [1] The buttons in the loaded movie (eq.swf) don’t work? [2] eq.swf is set to run at 120 fps, but my main movie pulls it down at 45 fps!? ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\ **Post date:** [September 13, 2002, 11:13am UTC](https://forum.kirupa.com/t/target-loading/5501/2 "2002-09-13T11:13:48Z")
What is the code on your buttons? And the loaded movie’s fps becomes the master movie’s fps when it is loaded. pom :asian: ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\ **Post date:** [September 13, 2002, 11:16am UTC](https://forum.kirupa.com/t/target-loading/5501/3 "2002-09-13T11:16:18Z")
hrmmm yeah…something that may make your movie not work is using \_root for the buttons…you should use something like \_parent which will look for it inside the movie clip which ur movie is loaded into 🙂 ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\ **Post date:** [September 13, 2002, 11:17am UTC](https://forum.kirupa.com/t/target-loading/5501/4 "2002-09-13T11:17:53Z")
OKI! but is there a way to get the loaded movie to run at 120 fps, while the main movie goes 45 fps? ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\ **Post date:** [September 13, 2002, 11:20am UTC](https://forum.kirupa.com/t/target-loading/5501/5 "2002-09-13T11:20:46Z")
no, i dont think so…the loaded movie inherits the main movies fps…so ur sorta stuck on that one…why do u use such high fps? i hardly ever go past 40… 🙂 ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\ **Post date:** [September 13, 2002, 11:23am UTC](https://forum.kirupa.com/t/target-loading/5501/6 "2002-09-13T11:23:36Z")
well, i’m making an equalizer, and it needs to run at 120 fps, or else it looks dumb! ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\ **Post date:** [September 13, 2002, 11:51am UTC](https://forum.kirupa.com/t/target-loading/5501/7 "2002-09-13T11:51:47Z")
You can use setInterval. Use the search feature, there was a thread about this with a component recently. pom :asian: ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\ **Post date:** [September 13, 2002, 11:55am UTC](https://forum.kirupa.com/t/target-loading/5501/8 "2002-09-13T11:55:29Z")
does the equalizer go with the music and stuff like that? cause it would be good to know how to do that…🙂 ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\ **Post date:** [September 13, 2002, 11:57am UTC](https://forum.kirupa.com/t/target-loading/5501/9 "2002-09-13T11:57:37Z")
YEAH, that would be VERY good, but no, it’s just a stand-alone equalizer! ☹ ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\ **Post date:** [September 13, 2002, 12:06pm UTC](https://forum.kirupa.com/t/target-loading/5501/10 "2002-09-13T12:06:01Z")
There was a post long ago about how to do that. You’d need a software to analyze the sound first (I think it was called marmelade) and then you can do a real equalizer. Let me look a bit around… ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\ **Post date:** [September 13, 2002, 12:09pm UTC](https://forum.kirupa.com/t/target-loading/5501/11 "2002-09-13T12:09:42Z")
[The site](http://www.marmalademedia.com.au/flashamp/) pom :asian: ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\ **Post date:** [September 13, 2002, 12:16pm UTC](https://forum.kirupa.com/t/target-loading/5501/12 "2002-09-13T12:16:58Z")
wow thats cool…the balloons talking is a bit lame though…hehe i’ll have to look into this more 🙂