# Using Presentation template and sounds **URL:** \ **Category:** flash\ **Created:** [November 13, 2003, 4:54pm UTC](https://forum.kirupa.com/t/using-presentation-template-and-sounds/35408 "2003-11-13T16:54:42Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![Deep\_Soul](https://avatars.discourse-cdn.com/v4/letter/d/13edae/32.png) [@Deep\_Soul](https://forum.kirupa.com/u/Deep_Soul)\ **Post date:** [November 13, 2003, 4:54pm UTC](https://forum.kirupa.com/t/using-presentation-template-and-sounds/35408/1 "2003-11-13T16:54:42Z")
Hi all! I’ve just started using Flash MX and I have recently created a Web based slide presentation. What I would like to do is t o have a small narrative on each slide. I figure having the sound clip for each slide (frame) as an independant sound object is the way to go. Where I’d like some advice… I want to have the clip start after a brief delay (2-3sec), and also to completely stop before the user moves to the next frame. However, if they want to skip the slide, I want to avoid 2 clips playing simultaneously. Should I put a stop to all sounds command before I start the clip for each frame? What’s the best way to control the sound in this fashion? Any advice appreciated! Deep\_Soul ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex011/uploads/kirupa/original/3X/6/2/621e5c11736f46532526e61be85940af4230f3e5.png) [@system](https://forum.kirupa.com/u/system)\ **Post date:** [November 13, 2003, 5:04pm UTC](https://forum.kirupa.com/t/using-presentation-template-and-sounds/35408/2 "2003-11-13T17:04:34Z")
i would suggest not using sounds in frame, rather attach them through actionscript and use intervals to delay the playing of the sounds. if you do a search on both you’ll be sure to find your answer